PC-62 Textured Amber BrownNovember 22, 2016
Mason Stains®(by Mason Colors Works): Blues and PurplesDecember 22, 2016
Mason Stains®(by Mason Color Works): Greens
$5.50 – $160.60
Mason Stains® (by Mason Color Works) Ceramic Stains
Definition of a Stain: A stain is essentially an oxide or series of oxides and opacifiers which have been blended together, calcined (or fired), then ground to a 200 or so mesh powder. The reasons for using a stain versus an oxide, etc. are (1) Stability of Color — an important criteria for wall tiles, sanitary ware, etc. (2) Insolubility — an insoluble (in water) stain greatly diminishes the risk in handling wet glazes when dipping or pouring, etc. (3) Color — the fired color of most stains is identical to the raw color because it has already been fired. It is, therefore, easier to use or to mix to achieve another color. It can also be mixed with a variety of medium to turn them into china paints, enamels, silk screen colors, decals, etc.
Key to Composition Chart
- Al Aluminum oxide Al2O3
- B Boric oxide B2O3
- Ca Calcium carbonate CaO3
- Co Cobalt oxide CoO
- Cr Chromium oxide Cr2O3
- Fe Iron oxide Fe2O3
- Mn Manganese dioxide MnO2
- Ni Nickel oxide NiO
- Pb Lead oxide PbO
- Pr Praseodymium oxide Pr6O11
- Sb Antimony dioxide Sb2O3
- Si Silicon dioxide SiO2
- Sn Tin dioxide SnO2
- Ti Titanium dioxide TiO2
- V Vanadium oxide V2O5
- Zn Zinc oxide ZnO
- Zr Zirconium dioxide ZrO2
1. Can be used as body stain in porcelain at high temperatures.
1a. Use only as body stain.
Firing temperatures can only be a rough guide. Firing at 2200°F on a slow schedule may give the equivalent maturing as firing at 2300°F on a fast schedule. The cycle, atmosphere, and rate of cooling will affect the color.
2. Max. firing limit 2156°F (1180°C)
3. Max. firing limit 2390°F (1310°C)
4. Max. firing limit 1976°F (1080°C)
Zinc oxide influences the color in a glaze more than any other element. Generally, zincless glazes should contain no magnesium oxide. Some colors containing zinc are to be used in a zincless glaze. The zinc in the color is in a combined form and will not harm the color, but free zinc oxide in the glaze can destroy the color.
5. Do not use Zinc in the glaze.
6. May be used with zinc or without zinc.
7. Zinc not necessary but gives better results.
8. Best results with no zinc.
Calcium oxide content as calcium carbonate should be between 12-15% for best color development. Adding the molecular equivalent of calcium oxide with Wollastonite, a natural calcium silicate, often gives better uniformity. The increased silica from the Wollastonite must be subtracted or the glaze will have a poor surface.
9. Glaze must contain 6.7 to 8.4% Calcium Oxide.
Notes by Mason Stains® (by Mason Color Works) – You must test under your conditions.
6200 Evergreen, 6201 Celadon, 6202 Florentine, 6204 Victoria Green, 6206 Grass Green, 6207 Celeste, 6209 Chrome, 6211 Pea, 6219 French, 6221 Turquoise, 6223 Ivy, 6224 Dark Green, 6226 Dark Leaf Green, 6236 Chartreuse, 6242 Bermuda, 6246 Blue Green, 6254 Dark Teal Green, 6255 Jade Green, 6264 Victoria, 6265 Leaf Green, 6266 Peacock, 6268 Sea Green, 6271 Mint Green, 6274 Nickel Silicate, 6280 Avocado, 6288 Turquoise
1/4 lb., 1 lb., 5 lbs.