Product Information
Clay
Modeling Clay
Slip
Raw Materials
Stains
Glazes
Bisque
Tools/Etc
Wheels/Accessories
Kilns/Accessories
Pugmills
Slabrollers
Hand Extruders
Equipment
Used Equipment
Everything Else |
Back to Tools
Kemper
Ribs, Scrapers, and
Throwing
Tools
Potter's Ribs-
RB1-RB7
These ribs are made from smooth-finished, imported
hardwood. They employ the basic shapes required for
opening, shaping, curving, smoothing and trimming wet
clay on the potter's wheel. Sizes range from 3-1/2" to
5-1/2" long.
$4.19- RB1
$3.79- RB2
$3.49- RB3
$3.99- RB4
$4.99- RB5
$4.19- RB6
$3.79- RB7 |
 
 |
Double "O" Rib-
RBOO
This 12" rib is hand formed and finished from imported
hardwood and is used for cutting, slicing, shaping and
smoothing soft clay.
$7.29 |
 |
Sculptor's
Thumb- STH
This is a compact hand-fitting sculpture tool that
duplicates thumb and finger strokes without abrasive
wear on the sculptor's hands, fingers, and thumbs. The
Sculptor's Thumb is made from imported hardwood and is
5" long.$6.49 |
 |
Throwing Sticks-
TS1-TS2
Patterned from the ancient Japanese egote, these 12
1/2" throwing sticks aid in shaping and compressing deep
and narrow necked wheel-thrown pieces. These throwing
sticks are made in two sizes of fine imported hardwood
and are polished to a satin smooth finish.
$10.69 each |
 |
Scrapers- S1-S12
Scrapers are used for shaping, smoothing and
trimming pottery shapes. The steel scrapers are made
from thin flexible spring steel.
$1.99 S1, Steel, 4-5/8"
$1.99 S3, Steel, 4"
$1.99 S4, Steel, 3-7/8"
$1.89 SA4, Aluminum, 3-7/8"
$1.79 S6, Steel, 4"
$2.49 S10, Steel, 3-3/8"
$3.29 S11S, Steel, 6"
$2.99 S12, Steel, 6" |
  |
Finish Rubbers
These finish rubbers are molded from pliable rubber in
two kidney shapes and two grades of resiliency. They are
used for smoothing, shaping and finishing pottery
pieces.
FRSS, Small, soft, 3-1/8"
FRSM, Small, hard, 3-1/8"
FRSO, Large, soft, 4-1/4"
FRH, Large, hard, 4-1/4"
$2.59 each |
FRH, FRSM, FRSO, FRSS |
Turning Tools-
TT1-TT5
Turning tools are used by potters to accurately shape,
contour, and trim clay and plaster forms on the wheel.
The heavy steel heads are brazed to steel shafts,
plated, and firmly set into smooth hardwood handles. TT4
is a right-hand half moon; TT5 is a left-hand half moon.
All turning tools are approximately 9-3/4" long.
$9.29 each |
 |
|
