PRO Needle Tool-
PRO
This is our heaviest needle tool. The large sharp needle
is firmly set in an aluminum handle which is finely
textured to provide a firm grip for wet hands. The Pro
Tool may be used to cut heavy clay strips, to cut
designs in clay, and to put holes in salt shakers.
6-5/8" long.
$2.19 |
 |
Potter's Needle-
PNH
This tool has a heavy sharp needle set in a 1/2-inch
diameter hardwood handle. Potters use this tool to cut
through and remove the uneven top edge of wheel thrown
items. Tool is 5" long.
$1.49 |
 |
Potter's Cut-Off
Needle- PCN
A necessity for all potters, this thin needle set in a
hardwood handle is used to cut through and remove the
uneven top edge of thrown items. The needle makes a
clean smooth cut with a minimum of drag. Tool is
5-1/2" long.$.89 |
 |
AB Lace Tool
Heavy, sharp needle; curved, pointed stainless steel
blade; 5/16" dia. handle, 6-1/2" overall length.
$2.59
|
 |
| Clean Up Tool-
K23 Although cleanup
tools have many uses, they are primarily used to "clean
up" slip-cast greenware by removing imperfections (seam
lines and mold marks) and enhancing and sharpening
cast-in details. Kemper Cleanup Tools present a variety
of shapes and sizes of blades to accommodate the
ordinary as well as the intricate cleanup job. All
blades are made from high quality stainless steel with
double edge keenly sharpened cutting edges.
$2.99 |
 |
Cut-Out Tool-
COR-COH
These tools are used to cut through wet clay to make
cut-out designs and openings in slab clay and clay
vessels. The COR has a thin double-edged steel blade for
thin-wall greenware and delicate work and is 4 1/2"
long. The COH has a heavier, sharp triangular stainless
steel blade that is designed for heavy, thick-wall
greenware and pottery and is 5 3/4" long.
$2.99 COR
$2.99 COH |
 |
| Fettling Knives-
F96-F97 Used to trim
pour hole waste, remove mold masks, carve and sculpt
ceramics and greenware. F97 has a hard tempered steel
blade with the same "springy" feel as most conventional
blades. The F96 is a softer steel blade, with much more
flexibility which it to bend. Both blades are 4" long
and firmly set in a hardwood handle for a total length
of 8".
$5.39 each |
 |
| Disposable
Surgical Scalpel
Perfect for cutting out designs and shapes in moist
clay. Surgically sharp, plastic handle, 5 1/2" long.
$1.99 |
 |
Hole Cutters-
HC1-HC4
Hole Cutters provide an easy method for cutting clean
holes in wet thick-wall greenware and wheel thrown
items. All four sizes can be used to achieve a variety
of designs. The cutting tubes are sharpened polished
brass and are set in smooth hardwood handles.
$3.09 HC1 3/16"
$3.49 HC1A 5 3/8"
$3.39 HC2 5/16"
$3.59 HC3 1/2"
$7.99 HC4 7/8" |
 |
Wire Loop
Sgraffito- WLS
The small wire loops on each end of this tool provide a
method of sgraffito in which variations of line width
can be made within a single stroke. The furrow created
by the loops is smooth and does not exhibit the
flakiness usually associated with other sgraffito
methods.$2.99 |
 |
Wire Stylus- WS
The Wire Stylus is a versatile tools for incising
greenware. A small wire loop, firmly set in a hardwood
handle creates various size furrows, depending on the
angle of the point.$3.99 |
 |
Double Ball
Stylus Tool- DBSS
Excellent for sgraffito, with variations according to
size of ball end. Each tool has a coarse and fine ball
of stainless steel, treated for hardness and set in a
smooth hardwood handle. The furrow made by the Double
Ball Stylus does not create flaking or collapsing of the
sgraffito line. 5-1/2" long.
$2.69 |
 |
| Detail Carving
Tools- DCS Easily carve
small and miniature details. They are perfect for that
extra touch. The steel blade is formed and precision
ground to a sharp point. The DCS tip is .030" wide and
5" in total length.
$3.49 |
 |
| Scratch Wire
Brush- SWB Many special
effects that were difficult (and time consuming) are
simple to achieve with a single tool. One stroke is all
it takes to make multiple fine lines with these angled
brushes. The heat-treated steel bristles are firmly set
in a firm grip, textured aluminum handle for a total
length of 5".
$3.99 |
 |
| Wet Texturing
Brush- WG2 These
bristles are super for use on soft, damp greenware or
clay. The brush is made with stainless steel wires
firmly set in a hardwood handle for a total length of 6
1/2".
$3.69 |
 |
Scratch and Lift
Tool- SLT
For both sgraffito (scratch) work and clay lifting.
Working end is a steel scratch knife, handle is smooth
plastic. Length is 7-1/2".
$4.759 |
 |
Basic Tool- BAS
This is an all-wood tool that is sharp and pointed on
one end and square and flat on the other. It is used for
modeling in soft clay, for cleaning hard-to-reach areas
on greenware and light sgraffito work. Length is 7-1/2".
$1.19 |
 |
Clay Lift Set-
CLS
The Clay Lift Set has two double-ended tools with
sharpened stainless steel spoons contoured for easy
insertion, lifting, and removal from moist clay.
Instructions are also included with each set. This set
makes possible the creation of many new decorating
patterns and varied effects previously difficult to
obtain, such as bird feathers, flower petals, and fish
scales. The spoons are firmly held by solid brass
ferrules to smooth wooden handles. Each tool is
approximately 7" long.
$6.99 |
 |
Cleanup Brush,
double-ended- CUB
The double-ended cleanup brush is used to clean small,
delicate areas in greenware.
$3.69 |
 |
