Pottery Tool
Kit- PTK
All the basic pottery tools required for the
professional as well as the beginner. The Kemper PTK
contains: Loop Tool, Ribbon Tool, Potter's Rib, Needle
Tool, Wood Modeling Tool, Sponge, Scraper, Wire Clay
Cutter. Kit is packaged in reusable, clear vinyl bag
with pockets for each tool.
$17.95 |
 |
| Budget PTK with
fettling knife -ATPTK9 All the basic pottery tools required for the
professional as well as the beginner. Contains: Fettling
knife, Loop Tool, Ribbon Tool, Potter's Rib, Needle
Tool, Wood Modeling Tool, Sponge, Scraper, Wire Clay
Cutter. Kit is packaged in reusable, clear vinyl bag
with pockets for each tool.
$13.99 |
|
| Ceramic Tool
Kit- CTK7
The seven most practical and
popular Kemper tools for ceramists. Good for beginners;
equally useful to advanced and professional level
ceramists. Ideal for classroom use. The complete tool
kit contains one each: Wire Loop Sgraffito, Cleanup
Tool, Cut-out Tool, Palette Knife, Lace Tool, Sabre Saw,
Salt and Pepper Drill. Kit is packaged in reusable
plastic tray.
$19.99 |
 |
Clay Cutter-
K35-K36
Clay Cutters are used for slicing and cutting lump
clay. They also cut pots and other items from the
throwing head of the potter's wheel. Hardwood 3" toggle
handles are firmly fastened to approximately 18" of fine
quality stainless steel for the K35, and high strength
braided nylon cord for the K36.
$2.49 K35 Wire Clay Cutter
$2.49 K36 Nylon Clay Cutter |
 |
| Slit Mark Stone-
SMS Within seconds you
can remove unsightly lines and marks left after firing
with our exclusive aloxite 4" Slit Mark Stone.
$3.49 |
 |
Klay Gun- K45
This tool is used to force soft clay through various
shaped openings in an assortment of interchangeable
discs. The extruded clay shapes can be used for an
almost limitless number of decorative effects such as
hair, grass, flower stamens, rope, logs, bricks, vines
and stems. The Klay Gun is furnished with a set of 19
discs that are formed to allow flush cutoff of the
extruded clay. It is constructed of sturdy die cast zinc
alloy and is about 4" long.
$13.99 |
 |
Large Clay
Gun/Extruder
Nice new item to extrude clay with. The gun is 20 inches
long and 2 inches in diameter. Comes with 3 basic dies
and a holder to use any of the dies included in the
small K-45 clay gun.
$49.99 |
 |
Dipping Tongs-
DTA
Dipping tongs are used to dip ceramic pieces directly
into the glaze. They are made from heavy plated steel
and feature four sharp gripping points that make minimal
contact with the piece being dipped. The tongs are about
10" long.$9.69 |
 |
Lid Master-
Standard and Large
A traditional wood worker’s tool modified and
improved for the potter to make lids for any pot. Take
one measurement and you have its opposite immediately.
Does the work of standard calipers with far greater
speed and accuracy. Standard Lid Master sizes lids up to
11". Large Lid Master sizes lids up to 20".
$14.95 Standard
$29.95 Large |
 |
| Aluminum
Calipers- AL8-AL12
These lightweight and easy to handle calipers transfer
measurements from model to clay for both inside and
outside dimensions. They are made from a tough aluminum
alloy, and are assembled with rust-free hardware that is
easily adjusted by hand.
$6.89 AL8, 8"
$7.79 AL10, 10"
$9.29 AL12, 12" |
 |
Pot Lift-
PL1-PL3
These Pot Lifts provide an easy method for removing
pottery items from the throwing wheel without damage.
They are made from rust-free, high-strength aircraft
aluminum alloy. Pot lifts come in pairs.
$10.79 PL1 6"
$9.69 PL2 5"
$9.19 PL3 4" |
 |
Raku Tongs-
RK37, RK45
These long-handled tongs are made from rust-free
plated steel and are used to safely handle Raku ware
without danger of burns to the potter. The jaws are
solid and strong yet, can gently grip both large and
small Raku pieces. Because the handles are tubular the
tongs are both lightweight and strong.
$39.69 RK37 Raku Tongs 41" Toothless
$35.99 RK45 Raku Tongs 31-1/2" Teeth
|
 |
Rolling Pins
(Non-bearing)
18” Solid Maple $23.50
24” Solid Maple $28.00
30” Solid Maple $33.00 |
|
