High Fire Top Loading Electric Kiln

Switch Controls. AMACO® top loading kilns are available with infinite control switches or the Select Fire™ automatic kiln controller. See page B for a list of Select Fire™ features. The Select Fire™ models (except HF-105SF 1Ø) come with a 50 amp power cord and a NEMA 6-50 or 15-50 plug for convenient power connection without the need for direct wiring.

Choose from 3 Top Loaders. The HF-105 is for large volume production while the HF-97 and 101 meet small to medium sized requirements. With a maximum temperature of Cone 8 (2320°F, 1271°C), these kilns are ideal for firing stoneware and porcelain.

Sturdy Construction. The exteriors of these kilns are welded steel finished in heat and rust resistant ebony and silver-gray with high-fire refractory and high temperature insulation. The lid rests on a ceramic fiber rope for a perfect seal and has a special vent for greater circulation of air. Well built to insure low cost firing, the firing time of these kilns varies from 5 to 8 hours depending upon size, firing speed, load and voltage.

Elements. Strongest, longest-lasting 14 gauge kanthal A-1 element wire fit into deeply recessed grooves in the firing chamber walls, and can be removed easily.

Firing Chamber Sizes. HF-97: 18"w x 18"d x 18"h; HF-101: 18"w x 18"d" x 27"h; HF-105: 30"w x 20"d x 24"h. UL and CSA Listed.

Fine-Art Electronic Kiln

UL and CSA Listed. These extra-large, front loading table model kilns are practical equipment for the school or studio workshop. They are available with the Select Fire™ automatic kiln controller only and feature well insulated, strong, steel exteriors and long-life enclosed elements. Firing Chamber Size: FA-44SF, 14"w x 14"d x 14"h; FA-88SF, 16"w x 18"d x 17"h. Matching cabinet bases are also available.

Contact us for more information about the fine-art electronic kiln.

Standard Top Loading Kiln

NOW WITH FIVE YEAR WARRANTY!

The EC-55 is a well-insulated top-loading floor model kiln with the capability to fire to Cone 03. It is perfect for firing earthenware, glass slumping, and decorating and for use with low fire clays and glazes. The EC-55 is best suited for small to medium sized classrooms and studios.

Features of the EC-55 include:

-3" of combined firebrick and block insulation for greater firing efficiency and lower radiant temperature making it extremely safe for school use
-18" x 18" x 18" (3.38 cubic foot) firing chamber capacity
-Strong 1/8" welded steel back frames, 11 gauge welded steel front frames, 18 gauge steel shells mean unsurpassed durability
-Spring-balanced, refractory-backed lid rests on ceramic fiber rope encircling the chamber for minimum heat loss, a perfect seal, and effortless opening and closing
-Spring latches allow lid to adjust chamber expansion as temperature changes inside during firing
-Top-quality Kanthal 18 gauge element wires are securely housed within deeply recessed grooves in firing chamber walls which can be removed easily
-The EC-55 is available with Select FireTM computer control or with Kiln-Sitter and Limit Timer plus Pyrometer
-4 lb. box of AMACO Kiln Shelf Wash included
-FIVE YEAR WARRANTY

High Temperature Front Loading Electronic Kilns

UL and CSA Listed. AMACO® High Temperature Front- Loading Kilns are dependable, efficient firing equipment, well known for easy operation, recommended for classroom and studio installation, and time-tested for almost half a century. Available with the Select Fire™ automatic kiln controller or infinite control switches, they have a maximum temperature of 2350°F (1288°C), they are ideally suited for stoneware and porcelain firing, for lower temperature firing of earthenware and overglaze decoration, and for glass slumping.

Sturdy Construction. The refractory backed, steel firing chamber doors fit snugly, swing out of the way for easy stacking, and can be lifted off the hinges. Kiln bases are handy storage cabinets. High fire refractory of firing chambers is backed with thick walls of block-type insulation to seal in the intense heat and keep exterior heat radiation to a minimum.

Elements, Switch Controls. High temperature, long-life, high-quality Kanthal A-1 wire elements are used in both the AH-10 and 30. The AH-30 was redesigned in 1999, eliminating the 21 element holders. The elements are now housed within the firebrick itself. With less stress on the firebrick, the refractory is expected to last much longer.
Firing Chamber Sizes. AH-10: 15"w x 21"d x 18"h; AH-30: 20"w x 20"d x 36"h.

Contact us for more information about high temperature front loading electronic kilns.