Home Products Contact Us Ebay MSDS
Columbus Clay Company - Hand Extruders

Product Information
Modeling Clay
Raw Materials
Hand Extruders
Used Equipment
Everything Else
Hand Extruders
Large Clay Gun/Extruder

Nice new item to extrude clay with. The gun is 20 inches long and 2 inches in diameter. Comes with 3 basic dies and a holder to use any of the dies included in the small K-45 clay gun.

Brent Clay Extruder

Now comes with a 3-piece die set.

The Brent manual clay extruder makes thousands of different solid or hollow shapes: tubes, bars, tiles, slabs -- the possibilities are endless.

Construction is heavy-duty steel pipe with wear and stress points case hardened to withstand all production applications. The barrel is 4 inches wide and holds 10 pounds of clay. An easy-to-remove end cap holds the die you choose. Pull the handle and use the extrusion for twists and braids, moldings, handles, cups or coils.

This clay extruder comes with the hardware needed to be bolted to a wall or bench and a 3-piece plastic die set with selector. An optional stand can be purchased to attach it to the end of Brent SR-14, SR-20 and SR-36 slab rollers.

Can also be used with the optional anodized aluminum Standard Die Set or the Hollow Die Set.

One year warranty.


Brent Clay Extruder HD

Now comes with 3-piece die set.

This solid welded steel clay extruder features an Exclusive Brent safety design. Two sets of clutch plates lock the clutch body assembly firmly in place at any height setting for maximum leverage. Pull up on the top plates to raise the handle and plunger or pull down on the bottom plates to lower them.

This design also assures equal pressure with any amount of clay in the barrel. The Brent Clay Extruder HD comes with three mounting brackets and hardware to securely bolt to a wall and the 3-piece die set with selector.

The heavy-duty steel 4" diameter barrel holds up to 10 lbs. of clay and an easy-to-use end cap holds the die you choose. The optional standard and hollow die sets can also be used.

One year warranty.


Standard Die Set

This 2-piece die set including selector is for use with the Brent Manual Clay Extruder or Brent Clay Extruder HD. Each die is made from anodized aluminum for longer life. Circles range from 3/16" to 5/8" diameter.


Hollow Die Set

For more intricate use of the Brent Manual Clay Extruder or Brent Clay Extruder HD, we designed a tube die set to make hollow extrusions. Use these dies to extrude hollow round, hexagonal and square shapes. Round tubes: 3/4", 2 3/4" and 3 1/8"; Hexagon tubes: 5/8", 1 1/8" and 1 5/8"; Square tubes: 1", 1 1/2" and 2".